MOLYBDOCENE DICHLORIDE
Bis(cyclopentadienyl)molybdenum(IV) dichloride
CAS: 12184-22-4
Molecular Formula: C10H10Cl2Mo10*
MOLYBDOCENE DICHLORIDE - Names and Identifiers
MOLYBDOCENE DICHLORIDE - Physico-chemical Properties
| Molecular Formula | C10H10Cl2Mo10* |
| Molar Mass | 297.03 |
| Water Solubility | Insoluble in water. |
| Appearance | Powder |
| Color | greenish-brown |
| Storage Condition | RT, nitrogen preservation |
| Sensitive | Air & Moisture Sensitive |
MOLYBDOCENE DICHLORIDE - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S37/39 - Wear suitable gloves and eye/face protection S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| UN IDs | UN3261 |
| WGK Germany | 3 |
| Hazard Class | 8 |
| Packing Group | III |
MOLYBDOCENE DICHLORIDE - Introduction
Bis(cyclopentadienyl)molybdenum(IV) dichloride is an organo-molybdenum compound with the chemical formula (C5H5)2MoCl2. The following is a description of some important properties, uses, methods and safety information about Bis(cyclopentadienyl)molybdenum(IV) dichloride:
Nature:
-Appearance: Bis(cyclopentadienyl)molybdenum(IV) dichloride is a solid, usually purple-black crystal.
-Melting point: about 202-204°C.
-Solubility: Soluble in some organic solvents, such as dimethyl sulfoxide and chloroform.
-Stability: relatively stable at room temperature, but may decompose under high temperature and oxidizing conditions.
Use:
-Catalyst: Bis(cyclopentadienyl)molybdenum(IV) dichloride can be used as a catalyst, especially in organic synthesis reactions, such as olefin polymerization and olefin cyclization reactions.
-Raw material: This compound can also be used as a raw material for preparing other organic molybdenum compounds.
Preparation Method:
- Bis(cyclopentadienyl)molybdenum(IV) dichloride can be obtained by reacting cyclopentadiene with molybdenum(IV) chloride. Specifically, cyclopentadiene may be reacted with molybdenum (IV) chloride in an organic solvent, and the target product may be obtained by appropriate separation and purification steps.
Safety Information:
-Precautions: When handling Bis(cyclopentadienyl)molybdenum(IV) dichloride, wear appropriate personal protective equipment, such as laboratory gloves, safety glasses and laboratory coats. Avoid inhalation, contact with skin and eyes.
-Storage: Bis(cyclopentadienyl)molybdenum(IV) dichloride should be stored in a dry, well-ventilated place, away from flammable materials and oxidizing agents.
-Waste disposal: Waste chemicals should be disposed of in accordance with local environmental regulations and follow proper waste management procedures.
Nature:
-Appearance: Bis(cyclopentadienyl)molybdenum(IV) dichloride is a solid, usually purple-black crystal.
-Melting point: about 202-204°C.
-Solubility: Soluble in some organic solvents, such as dimethyl sulfoxide and chloroform.
-Stability: relatively stable at room temperature, but may decompose under high temperature and oxidizing conditions.
Use:
-Catalyst: Bis(cyclopentadienyl)molybdenum(IV) dichloride can be used as a catalyst, especially in organic synthesis reactions, such as olefin polymerization and olefin cyclization reactions.
-Raw material: This compound can also be used as a raw material for preparing other organic molybdenum compounds.
Preparation Method:
- Bis(cyclopentadienyl)molybdenum(IV) dichloride can be obtained by reacting cyclopentadiene with molybdenum(IV) chloride. Specifically, cyclopentadiene may be reacted with molybdenum (IV) chloride in an organic solvent, and the target product may be obtained by appropriate separation and purification steps.
Safety Information:
-Precautions: When handling Bis(cyclopentadienyl)molybdenum(IV) dichloride, wear appropriate personal protective equipment, such as laboratory gloves, safety glasses and laboratory coats. Avoid inhalation, contact with skin and eyes.
-Storage: Bis(cyclopentadienyl)molybdenum(IV) dichloride should be stored in a dry, well-ventilated place, away from flammable materials and oxidizing agents.
-Waste disposal: Waste chemicals should be disposed of in accordance with local environmental regulations and follow proper waste management procedures.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: Bis(Cyclopentadienyl)Molybdenum Dichloride Visit Supplier Webpage Request for quotationCAS: 12184-22-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: Bis(cyclopentadienyl)molybdenum(IV) dichloride Request for quotationCAS: 12184-22-4
Tel: 15001012717
Email: biz5@infsci.com
Mobile: 15001012717
QQ: 3007471201
Product List: View Catalog
Spot supply
Product Name: Bis(Cyclopentadienyl)Molybdenum Dichloride Visit Supplier Webpage Request for quotationCAS: 12184-22-4
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: Bis(cyclopentadienyl)molybdenum(IV) dichloride Request for quotationCAS: 12184-22-4
Tel: 15001012717
Email: biz5@infsci.com
Mobile: 15001012717
QQ: 3007471201
Product List: View Catalog
View History